Heat Treatment Machines :

Proper heat treatment of the roller chain components is a critical aspect to optimum life. Mechanical and physical properties of the components can be altered so much by heat treatment, that if done improperly, more harm than good could result. Therefore, heat treatment must be understood and closely controlled to obtain the most effective results. 

See Videos

Power Press Machines :

A power press is a very useful machine in mass production. The various operations of the power press in Ceylon chain are cutting, bending, forming, assembling and riveting.

 

See Videos

Hexagonal Dryer Tube :

A burr is a raised edge or small piece of unwanted material remaining attached to a workpiece after the forming process. If the burrs are remained, the size of the part can not be accurately measured and the material can not be accurately set. It is therefore imperative to remove the burrs and to clean the parts before chain assembly process.


See Videos

Assembly Machines :

Assembly machines are one of the main machineries to produce chains. Tubes feed the parts (bush, roller and pin) one by one into an assembly machine and gripper arms adjust their position to assemble the parts to other chain components such as inner and outer plates.



See Videos

Rivet Machines :

The main purpose of this machine is to form a head on the unheaded end of the pintles after they have been inserted through the links. 



See Videos